3 PFAS detected, below EPA limits

City of Kyle: PFAS in the water

Serves about 52,000 people · Purchased surface water · Sampled 2023-08 to 2024-05 · 10 samples at 4 locations. Public water system TX1050002, Texas.

EPA test results (UCMR 5)

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid9.1avg19.4max7,000 pptUSGS health-based screening levelDetected, below level3 of 10 samples
PFHxAPerfluorohexanoic acid1.6avg3.1max4,000 pptUSGS health-based screening levelDetected, below level2 of 10 samples
PFPeAPerfluoropentanoic acid3.9avg4.5maxNo federal levelDetected (no federal level)5 of 10 samples
lithiumLithium10.9avg12.6max10 µg/LEPA health reference levelAbove screening level2 of 10 samples

26 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Filters certified for what was found

Here, PFAS were detected, lithium averaged above EPA's screening level. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Health-based violations since 2016

From EPA SDWIS. "Resolved" or "Archived" means the state closed it out.

ZIP codes served

78640

Where to read more