A sample above an EPA limit

PFAS in Mineral Wells, TX drinking water

2 public water systems serving ZIP codes in and around Mineral Wells were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFBA.

ZIP codes

76067

Water systems

City of Mineral Wells

Serves about 15,564 people · Surface water · Sampled 2024-11 to 2025-09 · 8 samples at 1 location · PWS ID TX1820001

A sample above an EPA limit

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid8.3avg9.5max7,000 pptUSGS health-based screening levelDetected, below level4 of 4 samples
lithiumLithium8.1avg11.6max10 µg/LEPA health reference levelOne or more samples above3 of 4 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (2)
  • 2023-08-01 Chlorite Stage 1 Disinfectants and Disinfection Byproducts Rule Resolved
  • 2017-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .083 MG/L Archived
Full report for City of Mineral Wells →

Parker County SUD Surface

Serves about 6,300 people · Surface water · Sampled 2025-02 to 2025-11 · 9 samples at 2 locations · PWS ID TX1840079

1 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid5.3avg7.8max7,000 pptUSGS health-based screening levelDetected, below level3 of 8 samples
lithiumLithium11.7avg15.3max10 µg/LEPA health reference levelAbove screening level8 of 8 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Parker County SUD Surface →

Filters certified for what was found

Here, PFAS were detected, lithium averaged above EPA's screening level. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Mineral Wells tap water safe to drink?

No water system serving Mineral Wells averaged above the PFOA/PFOS limit, but City of Mineral Wells had a sample above an epa limit (sample or limit details are in the table below). EPA SDWIS lists 2 health-based violations since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Mineral Wells water?

Yes. EPA's UCMR 5 tests found PFBA in at least one water system serving Mineral Wells. Results by system are listed above.

Who supplies drinking water in Mineral Wells, TX?

The largest tested public water systems serving ZIP codes in and around Mineral Wells are City of Mineral Wells (about 15,564 people), Parker County SUD Surface (about 6,300 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Mineral Wells tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Mineral Wells, TX