A sample above an EPA limit
City of Mineral Wells: PFAS in the water
Serves about 15,564 people · Surface water · Sampled 2024-11 to 2025-09 · 8 samples at 1 location. Public water system TX1820001, Texas.
EPA test results (UCMR 5)
| Chemical | Average* | Highest | Level | Status |
|---|---|---|---|---|
| PFBAPerfluorobutanoic acid | 8.3avg | 9.5max | 7,000 pptUSGS health-based screening level | Detected, below level4 of 4 samples |
| lithiumLithium | 8.1avg | 11.6max | 10 µg/LEPA health reference level | One or more samples above3 of 4 samples |
28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Filters certified for what was found
Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.
Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters
Health-based violations since 2016
From EPA SDWIS. "Resolved" or "Archived" means the state closed it out.
- 2023-08-01 Chlorite Stage 1 Disinfectants and Disinfection Byproducts Rule Resolved
- 2017-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .083 MG/L Archived