A sample above an EPA limit

PFAS in 60426 tap water

ZIP 60426 (Harvey, IL, Cook County) is served by 3 public water systems that EPA tested for 29 PFAS and lithium.

Harvey

Serves about 25,000 people · Purchased surface water · Sampled 2023-09 to 2024-06 · 10 samples at 1 location · PWS ID IL0311110

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Harvey →

South Holland

Serves about 22,000 people · Purchased surface water · Sampled 2024-07 to 2025-04 · 9 samples at 2 locations · PWS ID IL0312970

1 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid1.8avg7.3max7,000 pptUSGS health-based screening levelDetected, below level1 of 8 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (2)
  • 2022-06-01 Lead and Copper Rule Lead and Copper Rule Resolved
  • 2022-03-01 Lead and Copper Rule Lead and Copper Rule Resolved
Full report for South Holland →

Dixmoor

Serves about 2,973 people · Purchased surface water · Sampled 2024-02 to 2024-11 · 5 samples at 1 location · PWS ID IL0310660

A sample above an EPA limit

ChemicalAverage*HighestLevelStatus
PFOAPerfluorooctanoic acid1.2avg4.8max4 pptEPA limit (MCL)One or more samples above1 of 4 samples
PFOSPerfluorooctanesulfonic acid1.4avg5.5max4 pptEPA limit (MCL)One or more samples above1 of 4 samples

27 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Dixmoor →

Filters certified for what was found

Here, PFAS were detected. Look for a filter certified to NSF/ANSI 53 or 58 with a PFOA/PFOS claim.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Other ZIP codes on the same water

60406 60473 60476

Questions

Is 60426 tap water safe to drink?

No water system serving ZIP 60426 averaged above the PFOA/PFOS limit, but Dixmoor had a sample above an epa limit (sample or limit details are in the table below). EPA SDWIS lists 2 health-based violations since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

What filter removes PFAS in 60426?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

More for ZIP 60426 (Harvey)

On a private well? EPA's data covers public water systems only. Your state health department can tell you how to test a well.