A sample above an EPA limit
Fort Bend County MUD 50: PFAS in the water
Serves about 6,234 people · Purchased surface water · Sampled 2023-01 to 2024-03 · 9 samples at 1 location. Public water system TX0790277, Texas.
EPA test results (UCMR 5)
| Chemical | Average* | Highest | Level | Status |
|---|---|---|---|---|
| PFHxAPerfluorohexanoic acid | 3.4avg | 7.7max | 4,000 pptUSGS health-based screening level | Detected, below level2 of 4 samples |
| PFPeAPerfluoropentanoic acid | 3.8avg | 8.6max | No federal level | Detected (no federal level)2 of 4 samples |
| lithiumLithium | 9avg | 14max | 10 µg/LEPA health reference level | One or more samples above3 of 4 samples |
27 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Filters certified for what was found
Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.
Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters
Health-based violations since 2016
From EPA SDWIS. "Resolved" or "Archived" means the state closed it out.
No health-based violations recorded in EPA SDWIS since 2016.