A sample above an EPA limit

Fort Bend County MUD 2: PFAS in the water

Serves about 6,819 people · Purchased surface water · Sampled 2025-03 to 2025-12 · 4 samples at 1 location. Public water system TX0790038, Texas.

EPA test results (UCMR 5)

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid1.5avg6max7,000 pptUSGS health-based screening levelDetected, below level1 of 4 samples
PFPeAPerfluoropentanoic acid0.8avg3maxNo federal levelDetected (no federal level)1 of 4 samples
6:2 FTS6:2 Fluorotelomer sulfonic acid1.9avg7.5maxNo federal levelDetected (no federal level)1 of 4 samples
lithiumLithium8.9avg26.6max10 µg/LEPA health reference levelOne or more samples above2 of 4 samples

26 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Filters certified for what was found

Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Health-based violations since 2016

From EPA SDWIS. "Resolved" or "Archived" means the state closed it out.

No health-based violations recorded in EPA SDWIS since 2016.

ZIP codes served

77498

Where to read more