PFOA/PFOS average above EPA limit
Grand Bay Water Works Board: PFAS in the water
Serves about 11,100 people · Groundwater · Sampled 2024-08 to 2025-04 · 10 samples at 4 locations. Public water system AL0000983, Alabama.
EPA test results (UCMR 5)
| Chemical | Average* | Highest | Level | Status |
|---|---|---|---|---|
| PFOAPerfluorooctanoic acid | 30.7avg | 31.4max | 4 pptEPA limit (MCL) | Average above EPA limit2 of 8 samples |
| PFOSPerfluorooctanesulfonic acid | 24.9avg | 26.9max | 4 pptEPA limit (MCL) | Average above EPA limit2 of 8 samples |
| PFHpAPerfluoroheptanoic acid | 4avg | 4.4max | No federal level | Detected (no federal level)2 of 8 samples |
26 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Filters certified for what was found
Here, PFAS were detected. Look for a filter certified to NSF/ANSI 53 or 58 with a PFOA/PFOS claim.
Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters
Health-based violations since 2016
From EPA SDWIS. "Resolved" or "Archived" means the state closed it out.
No health-based violations recorded in EPA SDWIS since 2016.