Serves about 13,486 people · Groundwater · Sampled 2023-09 to 2024-03 · 6 samples at 3 locations · PWS ID WI7500726
1 PFAS detected, below EPA limits
| Chemical | Average* | Highest | Level | Status |
|---|
| PFBAPerfluorobutanoic acid | 6.7avg | 7.5max | 7,000 pptUSGS health-based screening level | Detected, below level2 of 6 samples |
28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Health-based violations since 2016 (1)
- 2019-01-01 Groundwater Rule Ground Water Rule Resolved
Full report for Plover Waterworks →Questions
Is Plover tap water safe to drink?
PFAS were detected (PFBA) in the Plover Waterworks water system, but averages were below EPA's limits. EPA SDWIS lists 1 health-based violation since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.
Are there PFAS in Plover water?
Yes. EPA's UCMR 5 tests found PFBA in at least one water system serving Plover. Results by system are listed above.
Who supplies drinking water in Plover, WI?
The tested public water system serving Plover is Plover Waterworks (about 13,486 people). Its name is on your water bill.
What filter removes PFAS from Plover tap water?
Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.
How can I test my own tap water for PFAS?
Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.