A sample above an EPA limit

PFAS in Kaysville, UT drinking water

2 public water systems serving ZIP codes in and around Kaysville were tested by EPA for 29 PFAS and lithium. No PFAS were detected.

ZIP codes

84037

Water systems

Kaysville City Water System

Serves about 32,976 people · Purchased surface water · Sampled 2024-08 to 2025-05 · 6 samples at 1 location · PWS ID UTAH06006

A sample above an EPA limit

ChemicalAverage*HighestLevelStatus
lithiumLithium3.2avg13max10 µg/LEPA health reference levelOne or more samples above1 of 4 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Kaysville City Water System →

Fruit Heights City Water System

Serves about 6,075 people · Purchased surface water · Sampled 2024-01 to 2024-10 · 4 samples at 1 location · PWS ID UTAH06017

No PFAS detected

ChemicalAverage*HighestLevelStatus
lithiumLithium2.5avg9.9max10 µg/LEPA health reference levelDetected, below level1 of 4 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (1)
  • 2023-07-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured 85.5 UG/L Resolved
Full report for Fruit Heights City Water System →

Do you need a filter?

In EPA testing, no PFAS were found above reporting levels in this water. Based on this data, a filter is not needed for PFAS. If you want one for taste or lead from home plumbing, these are certified for PFOA/PFOS and lead.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Kaysville tap water safe to drink?

No water system serving Kaysville averaged above the PFOA/PFOS limit, but Kaysville City Water System had a sample above an epa limit (sample or limit details are in the table below). EPA SDWIS lists 1 health-based violation since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Kaysville water?

No PFAS were detected at EPA's reporting levels in the 2 water systems tested in and around Kaysville. Results by system are listed above.

Who supplies drinking water in Kaysville, UT?

The largest tested public water systems serving ZIP codes in and around Kaysville are Kaysville City Water System (about 32,976 people), Fruit Heights City Water System (about 6,075 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Kaysville tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Kaysville, UT