1 PFAS detected, below EPA limits

PFAS in Marlin, TX drinking water

2 public water systems serving ZIP codes in and around Marlin were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFBA.

ZIP codes

76661 76680

Water systems

City of Marlin

Serves about 5,516 people · Surface water · Sampled 2025-03 to 2025-12 · 4 samples at 1 location · PWS ID TX0730002

1 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid3.1avg6.2max7,000 pptUSGS health-based screening levelDetected, below level1 of 2 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (35)
  • 2026-04-01 Total Haloacetic Acids (HAA5) Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .062 MG/L Archived
  • 2026-04-01 Long Term 2 Enhanced Surface Water Treatment Rule Long Term 2 Enhanced Surface Water Treatment Rule Resolved
  • 2026-03-01 Long Term 2 Enhanced Surface Water Treatment Rule Long Term 2 Enhanced Surface Water Treatment Rule Resolved
  • 2026-01-01 Total Haloacetic Acids (HAA5) Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .153 MG/L Archived
  • 2026-01-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .105 MG/L Resolved

30 more on the system page.

Full report for City of Marlin →

Tri County SUD

Serves about 5,353 people · Groundwater · Sampled 2023-04 to 2023-11 · 5 samples at 2 locations · PWS ID TX0730004

No PFAS detected

ChemicalAverage*HighestLevelStatus
lithiumLithium312avg325max10 µg/LEPA health reference levelAbove screening level4 of 4 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (124)
  • 2026-04-01 Arsenic Arsenic Rule · measured .02 MG/L Archived
  • 2026-04-01 Arsenic Arsenic Rule · measured .021 MG/L Archived
  • 2026-04-01 Arsenic Arsenic Rule · measured .014 MG/L Archived
  • 2026-01-01 Arsenic Arsenic Rule · measured .02 MG/L Archived
  • 2026-01-01 Arsenic Arsenic Rule · measured .021 MG/L Archived

119 more on the system page.

Full report for Tri County SUD →

Filters certified for what was found

Here, PFAS were detected, arsenic violations are on record, lithium averaged above EPA's screening level. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice. Reverse osmosis also reduces radium, arsenic and nitrate when its listing names them.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Marlin tap water safe to drink?

PFAS were detected (PFBA) in the City of Marlin water system, but averages were below EPA's limits. EPA SDWIS lists 159 health-based violations since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Marlin water?

Yes. EPA's UCMR 5 tests found PFBA in at least one water system serving Marlin. Results by system are listed above.

Who supplies drinking water in Marlin, TX?

The largest tested public water systems serving ZIP codes in and around Marlin are City of Marlin (about 5,516 people), Tri County SUD (about 5,353 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Marlin tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Marlin, TX