6 PFAS detected, below EPA limits
PFAS in Clute, TX drinking water
2 public water systems serving ZIP codes in and around Clute were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFHxS, PFBS, PFBA, PFHxA, PFPeA, 6:2 FTS, NFDHA.
Serves about 10,604 people · Purchased surface water · Sampled 2023-01 to 2023-10 · 18 samples at 5 locations · PWS ID TX0200004
6 PFAS detected, below EPA limits
| Chemical | Average* | Highest | Level | Status |
|---|
| PFHxSPerfluorohexanesulfonic acid | 1.9avg | 3.8max | 10 pptEPA 2024 limit, proposed for repeal | Detected, below level4 of 12 samples |
| PFBSPerfluorobutanesulfonic acid | 4avg | 4.9max | 2,000 pptEPA health-based value (Hazard Index) | Detected, below level6 of 12 samples |
| PFBAPerfluorobutanoic acid | 11.6avg | 12.4max | 7,000 pptUSGS health-based screening level | Detected, below level6 of 12 samples |
| PFHxAPerfluorohexanoic acid | 6.2avg | 8.9max | 4,000 pptUSGS health-based screening level | Detected, below level6 of 12 samples |
| PFPeAPerfluoropentanoic acid | 130avg | 175max | No federal level | Detected (no federal level)7 of 12 samples |
| NFDHANonafluoro-3,6-dioxaheptanoic acid | 13.4avg | 26.9max | No federal level | Detected (no federal level)2 of 12 samples |
| lithiumLithium | 24.6avg | 26.9max | 10 µg/LEPA health reference level | Above screening level9 of 12 samples |
23 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Health-based violations since 2016 (0)
No health-based violations recorded in EPA SDWIS since 2016.
Full report for City of Clute →Serves about 7,605 people · Purchased surface water · Sampled 2023-02 to 2023-11 · 16 samples at 3 locations · PWS ID TX0200035
6 PFAS detected, below EPA limits
| Chemical | Average* | Highest | Level | Status |
|---|
| PFBSPerfluorobutanesulfonic acid | 3avg | 4.5max | 2,000 pptEPA health-based value (Hazard Index) | Detected, below level3 of 12 samples |
| PFBAPerfluorobutanoic acid | 13.8avg | 38max | 7,000 pptUSGS health-based screening level | Detected, below level3 of 12 samples |
| PFHxAPerfluorohexanoic acid | 4avg | 5.7max | 4,000 pptUSGS health-based screening level | Detected, below level3 of 12 samples |
| PFPeAPerfluoropentanoic acid | 101avg | 180max | No federal level | Detected (no federal level)3 of 12 samples |
| 6:2 FTS6:2 Fluorotelomer sulfonic acid | 1.4avg | 5.8max | No federal level | Detected (no federal level)2 of 12 samples |
| NFDHANonafluoro-3,6-dioxaheptanoic acid | 7.8avg | 31.3max | No federal level | Detected (no federal level)1 of 12 samples |
| lithiumLithium | 36.5avg | 44max | 10 µg/LEPA health reference level | Above screening level11 of 12 samples |
23 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Health-based violations since 2016 (0)
No health-based violations recorded in EPA SDWIS since 2016.
Full report for City of Richwood →Questions
Is Clute tap water safe to drink?
PFAS were detected (PFHxS, PFBS, PFBA, PFHxA, PFPeA) in the City of Clute water system, but averages were below EPA's limits. EPA SDWIS lists no health-based violations since 2016 for these systems. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.
Are there PFAS in Clute water?
Yes. EPA's UCMR 5 tests found PFHxS, PFBS, PFBA, PFHxA, PFPeA, 6:2 FTS, NFDHA in at least one water system serving Clute. Results by system are listed above.
Who supplies drinking water in Clute, TX?
The largest tested public water systems serving ZIP codes in and around Clute are City of Clute (about 10,604 people), City of Richwood (about 7,605 people). Your address may get water from only one of them; it is named on your water bill.
What filter removes PFAS from Clute tap water?
Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.
How can I test my own tap water for PFAS?
Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.