1 PFAS detected, below EPA limits

PFAS in Sapulpa, OK drinking water

7 public water systems serving ZIP codes in and around Sapulpa were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFBA.

ZIP codes

74066 74131

Water systems

Tulsa

Serves about 413,000 people · Surface water · Sampled 2023-01 to 2023-10 · 24 samples at 2 locations · PWS ID OK1020418

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Tulsa →

Sand Springs

Serves about 28,774 people · Surface water · Sampled 2023-08 to 2024-05 · 12 samples at 1 location · PWS ID OK1020420

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Sand Springs →

Sapulpa

Serves about 19,702 people · Surface water · Sampled 2023-05 to 2024-02 · 12 samples at 1 location · PWS ID OK1020404

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (10)
  • 2024-10-17 LEAD AND COPPER RULE REVISIONS Lead and Copper Rule Revisions Resolved
  • 2022-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .082 MG/L Resolved
  • 2022-01-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .081 MG/L Resolved
  • 2017-07-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .081 MG/L Resolved
  • 2017-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .083 MG/L Resolved

5 more on the system page.

Full report for Sapulpa →

Creek Co RWD # 2

Serves about 12,788 people · Purchased surface water · Sampled 2024-10 to 2025-07 · 36 samples at 3 locations · PWS ID OK3001902

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (5)
  • 2024-10-17 LEAD AND COPPER RULE REVISIONS Lead and Copper Rule Revisions Resolved
  • 2022-10-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .087 MG/L Resolved
  • 2022-07-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .099 MG/L Resolved
  • 2022-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .084 MG/L Resolved
  • 2022-01-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .082 MG/L Resolved
Full report for Creek Co RWD # 2 →

Sapulpa Rural Water Company

Serves about 5,810 people · Purchased surface water · Sampled 2025-02 to 2026-01 · 15 samples at 2 locations · PWS ID OK3001904

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (2)
  • 2022-07-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .082 MG/L Resolved
  • 2022-04-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .085 MG/L Resolved
Full report for Sapulpa Rural Water Company →

Creek Co RWD # 1

Serves about 5,675 people · Surface water · Sampled 2024-02 to 2025-01 · 8 samples at 1 location · PWS ID OK1020419

1 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
PFBAPerfluorobutanoic acid1.4avg5.5max7,000 pptUSGS health-based screening levelDetected, below level1 of 4 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (4)
  • 2025-04-01 Total Haloacetic Acids (HAA5) Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .083 MG/L Archived
  • 2025-04-01 Total Haloacetic Acids (HAA5) Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .075 MG/L Archived
  • 2024-10-17 LEAD AND COPPER RULE REVISIONS Lead and Copper Rule Revisions Resolved
  • 2021-01-01 Interim Enhanced Surface Water Treatment Rule Interim and Long Term 1 Enhanced Surface Water Treatment Rule Resolved
Full report for Creek Co RWD # 1 →

Filters certified for what was found

Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Sapulpa tap water safe to drink?

PFAS were detected (PFBA) in the Creek Co RWD # 1 water system, but averages were below EPA's limits. EPA SDWIS lists 22 health-based violations since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Sapulpa water?

Yes. EPA's UCMR 5 tests found PFBA in at least one water system serving Sapulpa. Results by system are listed above.

Who supplies drinking water in Sapulpa, OK?

The largest tested public water systems serving ZIP codes in and around Sapulpa are Tulsa (about 413,000 people), Sand Springs (about 28,774 people), Sapulpa (about 19,702 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Sapulpa tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Sapulpa, OK