PFOA/PFOS average above EPA limit

PFAS in Milford, OH drinking water

3 public water systems serving ZIP codes in and around Milford were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFOA, PFOS, PFHxS, PFBS, PFBA, PFHxA, PFPeA.

ZIP codes

45111 45150

Water systems

Clermont Public Water System

Serves about 133,059 people · Surface water · Sampled 2024-09 to 2025-06 · 8 samples at 3 locations · PWS ID OH1302212

PFOA/PFOS average above EPA limit

ChemicalAverage*HighestLevelStatus
PFOSPerfluorooctanesulfonic acid9.2avg10.1max4 pptEPA limit (MCL)Average above EPA limit2 of 8 samples
PFBSPerfluorobutanesulfonic acid1.6avg3.1max2,000 pptEPA health-based value (Hazard Index)Detected, below level1 of 8 samples
PFPeAPerfluoropentanoic acid1.6avg3.3maxNo federal levelDetected (no federal level)1 of 8 samples

26 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (1)
  • 2018-10-01 TTHM Stage 2 Disinfectants and Disinfection Byproducts Rule · measured .081 MG/L Resolved
Full report for Clermont Public Water System →

Indian Hill City PWS

Serves about 15,000 people · Groundwater · Sampled 2023-04 to 2023-10 · 3 samples at 1 location · PWS ID OH3101112

PFOA/PFOS average above EPA limit

ChemicalAverage*HighestLevelStatus
PFOSPerfluorooctanesulfonic acid11.7avg12.4max4 pptEPA limit (MCL)Average above EPA limit2 of 2 samples
PFBSPerfluorobutanesulfonic acid3.8avg4max2,000 pptEPA health-based value (Hazard Index)Detected, below level2 of 2 samples
PFBAPerfluorobutanoic acid2.9avg5.7max7,000 pptUSGS health-based screening levelDetected, below level1 of 2 samples
PFHxAPerfluorohexanoic acid1.5avg3max4,000 pptUSGS health-based screening levelDetected, below level1 of 2 samples
PFPeAPerfluoropentanoic acid4avg4.8maxNo federal levelDetected (no federal level)2 of 2 samples

24 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Indian Hill City PWS →

Milford City PWS

Serves about 6,700 people · Groundwater · Sampled 2024-06 to 2025-02 · 2 samples at 1 location · PWS ID OH1301012

PFOA/PFOS average above EPA limit

ChemicalAverage*HighestLevelStatus
PFOAPerfluorooctanoic acid2avg4.1max4 pptEPA limit (MCL)One or more samples above1 of 2 samples
PFOSPerfluorooctanesulfonic acid7.8avg7.8max4 pptEPA limit (MCL)Average above EPA limit2 of 2 samples
PFHxSPerfluorohexanesulfonic acid3.1avg3.2max10 pptEPA 2024 limit, proposed for repealDetected, below level2 of 2 samples
PFBSPerfluorobutanesulfonic acid5.2avg5.4max2,000 pptEPA health-based value (Hazard Index)Detected, below level2 of 2 samples
PFBAPerfluorobutanoic acid3avg5.9max7,000 pptUSGS health-based screening levelDetected, below level1 of 2 samples
PFHxAPerfluorohexanoic acid3.7avg3.9max4,000 pptUSGS health-based screening levelDetected, below level2 of 2 samples
PFPeAPerfluoropentanoic acid5.2avg5.2maxNo federal levelDetected (no federal level)2 of 2 samples

22 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Milford City PWS →

Filters certified for what was found

Here, PFAS were detected. Look for a filter certified to NSF/ANSI 53 or 58 with a PFOA/PFOS claim.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Milford tap water safe to drink?

In EPA's 2023–2025 tests, PFOA or PFOS averaged above EPA's 4 ppt limit at a sampling location of Clermont Public Water System, which serves Milford. Utilities have until 2029 to meet that limit (EPA has proposed allowing 2031), so this is not yet a violation. EPA SDWIS lists 1 health-based violation since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Milford water?

Yes. EPA's UCMR 5 tests found PFOA, PFOS, PFHxS, PFBS, PFBA, PFHxA, PFPeA in at least one water system serving Milford. Results by system are listed above.

Who supplies drinking water in Milford, OH?

The largest tested public water systems serving ZIP codes in and around Milford are Clermont Public Water System (about 133,059 people), Indian Hill City PWS (about 15,000 people), Milford City PWS (about 6,700 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Milford tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Milford, OH