1 PFAS detected, below EPA limits

PFAS in Revere, MA drinking water

2 public water systems serving ZIP codes in and around Revere were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: 6:2 FTS.

ZIP codes

01908 02151

Water systems

Revere Water Division (Mwra)

Serves about 62,186 people · Purchased surface water · Sampled 2023-01 to 2023-10 · 6 samples at 1 location · PWS ID MA3248000

1 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
6:2 FTS6:2 Fluorotelomer sulfonic acid1.6avg6.2maxNo federal levelDetected (no federal level)1 of 4 samples

28 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Revere Water Division (Mwra) →

Nahant Water Dept. (Mwra)

Serves about 3,334 people · Purchased surface water · Sampled 2024-02 to 2024-11 · 4 samples at 1 location · PWS ID MA3196000

No PFAS detected

None of the 29 PFAS EPA tested for were found at or above reporting levels and lithium was not detected.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Nahant Water Dept. (Mwra) →

Filters certified for what was found

Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Revere tap water safe to drink?

PFAS were detected (6:2 FTS) in the Revere Water Division (Mwra) water system, but averages were below EPA's limits. EPA SDWIS lists no health-based violations since 2016 for these systems. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Revere water?

Yes. EPA's UCMR 5 tests found 6:2 FTS in at least one water system serving Revere. Results by system are listed above.

Who supplies drinking water in Revere, MA?

The largest tested public water systems serving ZIP codes in and around Revere are Revere Water Division (Mwra) (about 62,186 people), Nahant Water Dept. (Mwra) (about 3,334 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Revere tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for Revere, MA