2 PFAS detected, below EPA limits

PFAS in District Heights, MD drinking water

1 public water system serving ZIP codes in and around District Heights was tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFHxA, PFPeA.

ZIP codes

20747

Water systems

Washington Suburban Sanitary Commission

Serves about 1,900,000 people · Surface water · Sampled 2023-03 to 2024-06 · 11 samples at 2 locations · PWS ID MD0150005

2 PFAS detected, below EPA limits

ChemicalAverage*HighestLevelStatus
PFHxAPerfluorohexanoic acid4.2avg4.8max4,000 pptUSGS health-based screening levelDetected, below level4 of 8 samples
PFPeAPerfluoropentanoic acid5avg6.7maxNo federal levelDetected (no federal level)4 of 8 samples

27 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Washington Suburban Sanitary Commission →

Filters certified for what was found

Here, PFAS were detected. Filter certifications name PFOA and PFOS, which were not detected here. Shorter-chain PFAS like PFBA pass through carbon filters more easily, so reverse osmosis is the more reliable choice.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is District Heights tap water safe to drink?

PFAS were detected (PFHxA, PFPeA) in the Washington Suburban Sanitary Commission water system, but averages were below EPA's limits. EPA SDWIS lists no health-based violations since 2016 for these systems. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in District Heights water?

Yes. EPA's UCMR 5 tests found PFHxA, PFPeA in at least one water system serving District Heights. Results by system are listed above.

Who supplies drinking water in District Heights, MD?

The tested public water system serving District Heights is Washington Suburban Sanitary Commission (about 1,900,000 people). Its name is on your water bill.

What filter removes PFAS from District Heights tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.

More for District Heights, MD