A sample above an EPA limit
PFAS in Morton, IL drinking water
2 public water systems serving ZIP codes in and around Morton were tested by EPA for 29 PFAS and lithium. PFAS found in at least one: PFOS, PFHxS, PFNA, PFBS, PFBA, PFHxA, PFPeA.
Serves about 31,731 people · Groundwater · Sampled 2023-11 to 2024-06 · 14 samples at 7 locations · PWS ID IL1795040
A sample above an EPA limit
| Chemical | Average* | Highest | Level | Status |
|---|
| PFOSPerfluorooctanesulfonic acid | 2.2avg | 4.4max | 4 pptEPA limit (MCL) | One or more samples above1 of 14 samples |
| PFHxSPerfluorohexanesulfonic acid | 7.1avg | 8.3max | 10 pptEPA 2024 limit, proposed for repeal | Detected, below level4 of 14 samples |
| PFNAPerfluorononanoic acid | 2.2avg | 4.5max | 10 pptEPA 2024 limit, proposed for repeal | Detected, below level1 of 14 samples |
| PFBSPerfluorobutanesulfonic acid | 8.7avg | 10.4max | 2,000 pptEPA health-based value (Hazard Index) | Detected, below level5 of 14 samples |
| PFBAPerfluorobutanoic acid | 3avg | 6max | 7,000 pptUSGS health-based screening level | Detected, below level3 of 14 samples |
| PFHxAPerfluorohexanoic acid | 4avg | 4.4max | 4,000 pptUSGS health-based screening level | Detected, below level3 of 14 samples |
| PFPeAPerfluoropentanoic acid | 5avg | 6.2max | No federal level | Detected (no federal level)4 of 14 samples |
| lithiumLithium | 16.2avg | 17.2max | 10 µg/LEPA health reference level | Above screening level13 of 14 samples |
22 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Health-based violations since 2016 (0)
No health-based violations recorded in EPA SDWIS since 2016.
Full report for IL American-Pekin →Serves about 17,117 people · Groundwater · Sampled 2025-01 to 2025-07 · 9 samples at 3 locations · PWS ID IL1790500
No PFAS detected
| Chemical | Average* | Highest | Level | Status |
|---|
| lithiumLithium | 4.7avg | 9.5max | 10 µg/LEPA health reference level | Detected, below level1 of 6 samples |
29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.
Health-based violations since 2016 (0)
No health-based violations recorded in EPA SDWIS since 2016.
Full report for Morton →Questions
Is Morton tap water safe to drink?
No water system serving Morton averaged above the PFOA/PFOS limit, but IL American-Pekin had a sample above an epa limit (sample or limit details are in the table below). EPA SDWIS lists no health-based violations since 2016 for these systems. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.
Are there PFAS in Morton water?
Yes. EPA's UCMR 5 tests found PFOS, PFHxS, PFNA, PFBS, PFBA, PFHxA, PFPeA in at least one water system serving Morton. Results by system are listed above.
Who supplies drinking water in Morton, IL?
The largest tested public water systems serving ZIP codes in and around Morton are IL American-Pekin (about 31,731 people), Morton (about 17,117 people). Your address may get water from only one of them; it is named on your water bill.
What filter removes PFAS from Morton tap water?
Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.
How can I test my own tap water for PFAS?
Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.