No PFAS detected

PFAS in Culver City, CA drinking water

3 public water systems serving ZIP codes in and around Culver City were tested by EPA for 29 PFAS and lithium. No PFAS were detected.

ZIP codes

90008 90016 90018 90056 90094 90230

Water systems

Los Angeles-City, Dept. of Water & Power

Serves about 3,875,566 people · Surface water · Sampled 2023-12 to 2024-09 · 29 samples at 4 locations · PWS ID CA1910067

No PFAS detected

ChemicalAverage*HighestLevelStatus
lithiumLithium90.8avg100max10 µg/LEPA health reference levelAbove screening level16 of 16 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (2)
  • 2018-01-01 Long Term 2 Enhanced Surface Water Treatment Rule Long Term 2 Enhanced Surface Water Treatment Rule Resolved
  • 2016-01-01 Groundwater Rule Ground Water Rule Resolved
Full report for Los Angeles-City, Dept. of Water & Power →

Gswc - Culver City

Serves about 38,233 people · Purchased surface water · Sampled 2023-11 to 2024-08 · 4 samples at 1 location · PWS ID CA1910030

No PFAS detected

ChemicalAverage*HighestLevelStatus
lithiumLithium45.2avg60max10 µg/LEPA health reference levelAbove screening level4 of 4 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Gswc - Culver City →

Cal/Am Water Company - Baldwin Hills

Serves about 20,724 people · Purchased surface water · Sampled 2023-06 to 2025-11 · 14 samples at 5 locations · PWS ID CA1910052

No PFAS detected

ChemicalAverage*HighestLevelStatus
lithiumLithium18.3avg27max10 µg/LEPA health reference levelAbove screening level7 of 14 samples

29 of 29 PFAS tested were not detected. *Highest sampling-location average (non-detects counted as 0), the way EPA compares UCMR 5 data to the PFAS limits. PFAS in parts per trillion (ppt = ng/L); lithium in µg/L.

Health-based violations since 2016 (0)

No health-based violations recorded in EPA SDWIS since 2016.

Full report for Cal/Am Water Company - Baldwin Hills →

Filters certified for what was found

Here, lithium averaged above EPA's screening level.

Certification tests use PFOA/PFOS levels far above tap water and do not yet show reduction down to 4 ppt. Replace cartridges on schedule. Check the model number on the certifier's site (IAPMO, NSF, WQA). As an Amazon Associate we earn from qualifying purchases. How we pick filters

Questions

Is Culver City tap water safe to drink?

EPA's tests found no PFAS at reporting levels in the water serving Culver City. EPA SDWIS lists 2 health-based violations since 2016 for these systems; see each system below. This is monitoring data, not a safety ruling. Your utility's annual Consumer Confidence Report has the full picture.

Are there PFAS in Culver City water?

No PFAS were detected at EPA's reporting levels in the 3 water systems tested in and around Culver City. Results by system are listed above.

Who supplies drinking water in Culver City, CA?

The largest tested public water systems serving ZIP codes in and around Culver City are Los Angeles-City, Dept. of Water & Power (about 3,875,566 people), Gswc - Culver City (about 38,233 people), Cal/Am Water Company - Baldwin Hills (about 20,724 people). Your address may get water from only one of them; it is named on your water bill.

What filter removes PFAS from Culver City tap water?

Pick one whose NSF/ANSI 53 or 58 certification names PFOA and PFOS, from NSF, IAPMO R&T, WQA, CSA or UL. Certified pitchers start around $35; under-sink carbon and reverse osmosis systems cost $150 to $700. Reverse osmosis also handles shorter-chain PFAS better. See best water filters for PFAS.

How can I test my own tap water for PFAS?

Lab mail-in kits cost about $85 to $335 or more. See how to test water for PFAS.